mou/over=id msa0:

%MOUNT-I-MOUNTED, VAXGKS mounted on _MSA0:

 $ dir/siz msa0:

Directory MSA0:[]

VAXGKS020.A;1            16
VAXGKS020.B;1           267
VAXGKS020.C;1            36
VAXGKS020.D;1            63

Total of 4 files, 382 blocks.

 $ @sys$update:vmsinstal vaxgks020 msa0:


        VAX/VMS Software Product Installation Procedure V4.7    


It is 18-SEP-1987 at 17:04.
Enter a question mark (?) at any time for help.

* Are you satisfied with the backup of your system disk [YES]? 

Please mount the first volume of the set on MSA0:.
* Are you ready? yes

%MOUNT-I-MOUNTED, VAXGKS mounted on _MSA0:

The following products will be processed:

  VAXGKS V2.0


        Beginning installation of VAXGKS V2.0 at 17:04

%VMSINSTAL-I-RESTORE, Restoring product saveset A...
%VMSINSTAL-I-RELMOVED, The products release notes have been successfully moved to SYS$HELP.

        PostScript is a registered trademark of Adobe Systems, Inc.
        LaserWriter is a registered trademark of Apple Computer, Inc.
        Tektronix is a registered trademark of Tektronix, Inc.
        Ada is a registered trademark of the U.S. government
           ( Ada Joint Program Office ).

        
* Do you want to purge files replaced by this installation [YES]? 

                 LANGUAGE BINDING MENU

You can use the following menu to select language bindings.
Bindings marked with a '*' have already been selected. You can remove
a binding from the list of selected bindings by selecting it again. You
may select more than 1 language binding at a time by using a comma-
separated list.

NOTE : Initially ALL bindings are selected.


 1: Fortran binding      *

                2: EXIT the menu phase
*                Menu Choice [2]: 

* Have you selected all the bindings you want [YES]? 

                 FONT MENU

You can use the following menu to select GKS optional fonts
( Fonts 1 and -1 are ALWAYS provided ). Fonts marked with a '*' 
after them have already been selected.  You can remove a font 
from the selected list by selecting it again. You may select
more than 1 font at a time by using a comma-separated list.

NOTE: Initially ALL fonts are selected.


 2: Stroke Font (- 2)  *          3: Stroke Font (- 3)  *
 4: Stroke Font (- 4)  *          5: Stroke Font (- 5)  *
 6: Stroke Font (- 6)  *          7: Stroke Font (- 7)  *
 8: Stroke Font (- 8)  *          9: Stroke Font (- 9)  *
10: Stroke Font (-10)  *         11: Stroke Font (-11)  *
12: Stroke Font (-12)  *         13: Stroke Font (-13)  *
14: Stroke Font (-14)  *         15: Stroke Font (-15)  *
16: Stroke Font (-16)  *         17: Stroke Font (-17)  *
18: Stroke Font (-18)  *         19: Stroke Font (-19)  *
20: Stroke Font (-20)  *         21: Stroke Font (-21)  *
22: Stroke Font (-22)  *         23: Stroke Font (-23)  *

               24: EXIT the menu phase
*                Menu Choice [24]: 

* Have you selected all the font files that you want [YES]? 

                 LANGUAGE DEFINITION FILES MENU

You can use the following menu to select language definition files.
Files marked with a '*' have already been selected. You can remove
a file from the list of selected files by selecting it again. You
may select more than 1 language file at a time by using a comma-
separated list.

NOTE : Initially ALL files are selected.


 1: BASIC include file                       *
 2: FORTRAN ( non-binding ) include file     *
 3: C include file                           *
 4: COBOL include file                       *
 5: PASCAL include file                      *
 6: PL/I Procedure definition file           *
 7: PL/I Function definition file            *
 8: Ada package definition file              *
 9: BLISS include file                       *

               10: EXIT the menu phase
*                Menu Choice [10]: 

* Have you selected all the files you want [YES]? 

                 DEVICE SUPPORT MENU

You can use the following menu to select GKS device support. 
GKS device handlers, workstation handlers, or the Workstation
Manager marked with a '*' have already been selected. You can
remove an item from the selected list by selecting it again.
You may select more than 1 device at a time by using a comma-
separated list.

NOTE: If you choose a device handler marked '( #WM )'
the Workstation Manager will also be selected. You must
also de-select ALL device handlers marked '( #WM )'
BEFORE you can de-select the Workstation Manager.  The
Metafile input and output handlers are ALWAYS provided. 

( #WM ) Means that this handler requires the Workstation Manager.

Initially ALL handlers are selected.

 1: ReGis Handler (VT125,VT240,VT241,LCP01)            * ( #WM )
 2: Sixel Handler (LA12/34/50/100/210,LN03-Plus)       * ( #WM )
 3: LVP16,HP7550/7580/7585/7475, LG MPS-2000 Handler   * ( #WM )
 4: PostScript Handler (Apple LaserWriter)              
 5: Tektronix 4014 Handler                             * ( #WM )
 6: Workstation Manager                                *

                7: EXIT the menu phase
*                Menu Choice [7]: 

* Have you selected all the files you want [YES]? 

                 HANDLER TEMPLATE MENU

You can use the following menu to select handler templates in the
language(s) of your choice if you intend to write your own graphic
handlers. Language templates marked with a '*' have already been
selected. Selected language templates will be placed in a subdirectory
by language in SYS$COMMON:[SYSHLP.EXAMPLES.GKS.TEMPLATES].

NOTE: Initially ALL templates ARE NOT selected.


 1: FORTRAN Language Template      
 2: PASCAL Language Template       
 3: C Language Template            
                4: EXIT the menu phase
*                Menu Choice [4]: 1,2,3

                 HANDLER TEMPLATE MENU

You can use the following menu to select handler templates in the
language(s) of your choice if you intend to write your own graphic
handlers. Language templates marked with a '*' have already been
selected. Selected language templates will be placed in a subdirectory
by language in SYS$COMMON:[SYSHLP.EXAMPLES.GKS.TEMPLATES].

NOTE: Initially ALL templates ARE NOT selected.


 1: FORTRAN Language Template      *
 2: PASCAL Language Template       *
 3: C Language Template            *
                4: EXIT the menu phase
*                Menu Choice [4]: 

* Have you selected all the files you want [YES]? 

* Do you wish to have the help library for GKS  [YES]? 

* Do you wish to perform the Installation Verification Procedure [YES]? 

        A copy of the Installation Verification Procedure will be put in
        SYS$COMMON:[SYSHLP.EXAMPLES.GKS]



Devices supported for running the IVP:
 VT125 VT_OUTPUT VT240 TEKTRONIX TEK_OUTPUT 

* Enter the device type to use [VT125]: 
* Does the VT125 have a color monitor [NO]? 

        The VAX GKS Installation Verification Procedure can run using 
        your current terminal, or any unallocated terminal. The 
        terminal type must match the answer to the previous question.

* Use this terminal for output [YES]? 

        STARTING to perform all the installation work.  If you are
        using a multi-media kit you will be prompted to insert the
        next distribution media, otherwise no additional user actions
        are necessary from this point.

%VMSINSTAL-I-RESTORE, Restoring product saveset B...
%VMSINSTAL-I-RESTORE, Restoring product saveset C...
%VMSINSTAL-I-RESTORE, Restoring product saveset D...

        No user actions are necessary from this point.
        The remaining part of the installation will take 
        ( 5 - 20 minutes ) depending on your CPU.


        The VAX GKS run-time library has been processed successfully.

        The installation procedure is continuing...


        The VAX GKS language bindings have been processed successfully

        The installation procedure is continuing...

        Old font files deleted, installing the new font files...


        Fonts installed, installation procedure continuing...
    

        Language files installed, installation procedure continuing....


        Handler files installed, installation procedure continuing....

%VMSINSTAL-I-SYSDIR, This product creates system directory [SYSHLP.EXAMPLES.GKS].
%VMSINSTAL-I-SYSDIR, This product creates system directory [SYSHLP.EXAMPLES.GKS.TEMPLATES].

        VAX GKS has built successfully.
        Continuing installation...


  System Manager:

        Upon completion of this installation, please be sure to 
        edit the system startup files as described in the VAX GKS 
        Installation Guide.

%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Beginning the VAX GKS Installation Verification Procedure.

[IVP-Output]

        If the results of the Installation Verification Procedure looks
        like the illustration provided with the VAX GKS Installation Guide,
        then installation has been successful.


        Installation of VAXGKS V2.0 completed at 17:07



        VMSINSTAL procedure done at 17:07



 $ 
